EBT Model Track Plan version 6b
800x600 (96k) 
A track plan for an HOn3 EBT layout being developed by Ed Van Buren.
This section contains photos taken and scanned by other photographers. They are published here by permission and are NOT available for reproduction.
EBT Model Track Plan version 6b
800x600 (96k)
A track plan for an HOn3 EBT layout being developed by Ed Van Buren.
EBT Model Track Plan version 2
800x600 (89k)
A track plan for an HOn3 EBT layout being developed by Ed Van Buren.
Larry Card brought some of his Nn3 scale EBT models to the railroad's opening weekend in 2004 for a couple of folks to photograph and for more to enjoy. One hopper was lost when it fell to the ground and was covered by a blade of grass (OK, it was just the brake wheel). Photos were taken with a 28-80mm lens and +1 or +2 diopter closeup filter, with the aperture stopped all the way down.
Nn3 Model
640x441 (32k)
Caboose 28. A Republic Locomotive Works kit.
Nn3 Model
640x351 (27k)
Mikado number 19 has a Marklin chassis, a Bachmann 0-6-0 switcher shell
with styrene cab sides cut to "EBT specs", and Details Associates pilot and
steam turret. The tender is scratchbuilt from styrene and rides on
MicroTrains Z scale Bettendorf trucks.
Nn3 Model
640x349 (29k)
Old EBT no. 1 with combine 34. The combine is a cut-down N scale car.
Nn3 Model
640x369 (24k)
A string of rock hoppers. More Republic Locomotive Works kits.
These photos of EBT hoppers recently purchased by Cumbres&Toltec Scenic RR are courtesy of Roger Hogan, of "The Hotel and Shops" in Chama, NM (thehotel@cvn.com). They were taken by Mr. Hogan in Chama, NM on 5/26/2000, just a few days after the hoppers arrived.
EBT in Chama, NM
488x366 (26k)
Three hoppers on the shop track.
EBT in Chama, NM
488x366 (36k)
Leftmost hopper in string of 3 hoppers on the shop track. For comparison,
here is a photo of the same hopper where it had been in Mt. Union
(leftmost in the photo) 900x600 (95k) (linked from
Chris Coleman's website)
EBT in Chama, NM
488x366 (33k)
Center hopper in string of 3 hoppers on the shop track.
EBT in Chama, NM
488x366 (33k)
Rightmost hopper in string of 3 hoppers on the shop track.
Coles Valley Branch
600x425 (125k) -
1200x849 (407k)
This retaining wall is on the Coles Vally Branch in an area that is now
State Game Lands, Feb 2000 by Dave Padula.
#12 and #14
600x409 (75k) -
1200x817 (253k)
Locomotives #12 and #14 are both back in the yard. #12 is taking on
coal, and #14's crew has just finished watering her. Fall Spectacular '98 by
Dave Padula.
'98 Whistle salute
600x466 (77k) -
1200x931 (251k)
The 1998 Whistle Salute, by Dave Padula.
page by Bill Adams
