The final work session of 2003.
Machine Shop [2003nov1,shop1]
600x402 (49k) -
1200x803 (129k)
Looking toward the main shop entrance in the machine shop.
Machine Shop [2003nov1,shop2]
600x404 (50k) -
1200x807 (145k)
Looking east in the machine shop.
Machine Shop [2003nov1,shop3]
600x398 (41k) -
1200x796 (123k)
The roof trusses in the machine shop. At left is the opening for the large gable
and window (directly opposite the blacksmith shop).
Machine Shop [2003nov1,shop4]
322x480 (33k) -
604x900 (85k)
Looking into the tool room.
Car Shop Windows [2003nov1,carshop]
600x399 (44k) -
1200x798 (139k)
One of the seven car shop windows restored in the 1980's is touched up and repainted.
Section Shed [2003nov1,shed1]
600x409 (48k) -
1200x818 (144k)
Painting the section shed.
Section Shed [2003nov1,shed2]
325x480 (36k) -
609x900 (97k)
Painting the section shed.
Section Shed [2003nov1,shed3]
328x480 (38k) -
615x900 (93k)
Installing an interim window sash in the section shed.
MOW Cart [2003nov1,cart]
600x409 (69k) -
1200x817 (196k)
The MOW cart that FEBT has used quite a bit this year.
Section Shed [2003nov1,shed4]
600x409 (59k) -
1200x817 (182k)
The sheds at the south end of the yard are looking pretty good.
Compare it to this 1998 photo.
Section Shed [2003nov1,shed5]
600x408 (58k) -
1200x816 (179k)
Another view of the sheds.
Section Shed [2003nov1,shed6]
600x410 (73k) -
1200x820 (234k)
And the sheds as seen from the coaling station.
page by Bill Adams